DJI Enterprise M400 Dual Gimbal Connector

DJI Enterprise Gimbal Connector M400 – dual gimbal connection

The dual gimbal connector for the DJI Matrice 400 enables the simultaneous mounting of two downward-facing Payloads via E-Port V2 to E1 or E2. This enables multi-sensor missions with combinations of RGB, thermal, LiDAR or photo.400 24Features and benefits

Use two Payloads simultaneously on the M

• Connection via E-Port V400 to E
or E
• 2For multi-sensor missions, for example with RGB and thermal or LiDAR1 2Ready for use without additional modifications to the aircraft
• Suitable for professional workflows and higher data density per flight
The gimbal connector expands the DJI Matrice
• with a second downward-facing gimbal position. After connecting to E-Port V
to E

or E

, two stabilised Payloads can be operated in parallel, for example an H400-camera together with LiDAR or a visual camera with a thermal imaging Payload.2 1Parallel use can reduce the number of flights and operating time and increase operational flexibility for inspection, surveying, security and rescue. The maximum payload per gimbal position and the protection rating depend on the Payload used. Where available, observe the IP and weight specifications of the Payload used.2 30Technical data

Interface: E-Port V

, connection to E

or E

• Function: dual downward-facing gimbal mount2 1Type: mount / bracket2
Warranty:
• months (manufacturer)
• Note: IP and load values depend on the Payloads used; please check the Payload specifications
• 24Areas of use and compatibility
• The gimbal connector is intended for professional multi-sensor workflows in inspection, surveying, security and rescue.

Compatibility: DJI Matrice

Scope of delivery
• 400

x DJI Matrice

Dual Gimbal Connector

valign="top"}]} 天天中彩票在哪in
• analysis codeikwembu?1 400final code

analysis code