Binding – Linking DJI R/C Plus Controller Matrice 300RTK
You have your drone system DJI Matrice 300 RTK with the new DJI R/C Plus Enterprise Controller expanded? Linking/binding not working? Here's the latest guide on how to fix it:
Connecting the RC Plus Controller DJI M300 RTK
- DJI M300
- DJI RC Plus control
- You will need a few things to complete the DJI to connect the M300 and the RC Plus Controller.
If you haven't already installed it, download the latest version of DJI Assistant 2 for Enterprise .
DJI Assistant 2 for companies
Matrice 300 RTK UAV Offline Firmware Update (RC PLUS support) v57.00.01.00
Matrice 300 RTK RC DJI Pilot offline firmware update（RC PLUS） v01.02.04.40
To bind the RC Plus to the M300, you need to... DJI Use Assistant 2 Offline Upgrade to v57 of the software, not v7, which is installed via the online update.
Connect the M300 to your computer using a USB cable.
When the M300 is connected to the PC, it should be in DJI Assistant for Enterprise in the device list the Matrice Display 300 RTK.
- Click on the Offline Upgrade option in the left menu bar.
- DJI Offline upgrade option – DJI M300 v57 firmware upgrade
- Select the v57 file that you downloaded from the DJI-downloaded from the website.
- Then click the Start Upgrade button.
- Once the upgrade is complete, you can connect your RC Plus to your M300.
- On the RC Plus, make sure you have selected M300 as the model and click on Link.
- Press and hold the power button on the M300 for 5 seconds. You will then hear a beep from the drone, and the pairing should be complete.
Good luck!